Loading....Please wait !!

Potable Water Treatment

To ensure that the water is safe for drinking, the NWC subjects the water to an expensive treatment process, which involves:

Although the specific details may vary depending on the type of treatment system available, the water treatment process usually involves five (5) distinct stages. They are:-

The process described above may be shortened or compressed depending on the quality of the raw water source, the available treatment infrastructure, the preferred treatment method or other factors. For instance, water that is taken from the aquifer via wells is usually only disinfected. This is so because this water is usually much purer than surface water because it is filtered naturally through the earth before rising to the surface.

All through the water treatment process the water is tested to make sure that the quality is just right. Some of the water samples that are collected are taken to a laboratory where they are examined to make sure that the water meets the Interim Jamaica Drinking Water Criteria and the World Health Organization (WHO) standards.

Water quality is monitored to quantify the following:

Nitrates Calcium Total coliform Nitrites Sodium
Total Faecal Coliform Silica Magnesium Total solids Total Dissolved Solids
Iron Manganese Total Suspended Solids Phosphates Sulphate
Fluoride Chloride Total Plate Count Specific Conductivity Aluminium
Alkalinity Turbidity Colour Chemical Oxygen Demand Biochemical Oxygen Demand

Health and aesthetics are the main determinants for the safety of water. The NWC uses the Interim Jamaican Criteria developed from WHO guidelines to set the standards for the potability of water. The NWC also conducts research and implements cost-effective solutions for the treatment of Jamaica's water supplies.

Our team consists of a range of chemists, microbiologists, environmental scientists as well as trained laboratory analysts, laboratory attendants, field assistants and administrative staff committed to providing accurate data to ensure the best potable water quality - free from coliform bacteria, free from colour, odour and taste.

Also see : Wastewater Treatment

Water Fact

A leaky faucet can waste from 10 up to 100 gallons of water per day.